10 Factors to consider when choosing a cabinet or rack

The sheer number and different types of cabinets and racks can make choosing the right one for your data center a daunting task. But, if you consider your requirements one at a time, you can zero in on the right cabinet or rack for your application.

A cabinet is an enclosure with four rails and a door (or doors) and side panels. A rack is an open, freestanding 2- or 4-post frame that doesn’t have doors or sides. The decision on whether to use a cabinet or rack depends on a number of factors.

1. Equipment data-center
Before you choose a cabinet or rack, you need to determine what equipment you’re planning to house. This list can include servers, switches, routers, and UPSs. Consider the weight of your equipment as well. The extra stability of a cabinet might be important if you’re installing large, heavy equipment like servers. An open rack is more convenient than a cabinet if you need frequent access to all sides of the equipment.

2. Environment
With the open design, racks are a good choice in areas where security isn’t a concern such as in locked data centers and closets. And racks typically cost less than cabinets.

Cabinets, on the other hand, protect equipment in open, dusty, and industrial environments. Aesthetics can be a factor too. Will customers or clients see your installation? A cabinet with a door looks much neater than an open rack. When you’re trying to create a professional image, everything counts.

3. Ventilation
If your equipment needs ventilation, a rack offers more air circulation than a cabinet. Even if your cabinet is in a climate-controlled room, the equipment in it can generate a lot of heat. The requirements for additional airflow increase as more servers are mounted in a cabinet. Options to improve airflow include doors, fans, and air conditioners.

4. Size
Width: The width between the rails in both cabinets and racks is 19 inches with hole-to-hole centers measuring 18.3 inches. But there are also cabinets and racks with 23-inch rails. Most rackmount equipment is made to fit 19-inch rails but can be adapted to fit wider rails.

Rack Units: One rack unit (RU or U) equals 1.75″ of vertical space on the rails. A device that’s 2U high takes up 3.5 inches of vertical rack space. Rack units are typically marked on the rails. The number of rack units determines how much equipment you can install.

Depth: Cabinets and four-post open racks come in different depths ranging anywhere from 24″ to 48″ to accommodate equipment of varying sizes, particularly extra-deep servers. The rails on some cabinets and 4-post open racks are also adjustable to different depths.

When you consider the width, height, and depth of a cabinet or rack, clarify whether they are inside or outside dimensions.

5. Weight
Cabinets and racks vary in terms of the amount of weight capacity. Some cabinets can hold 1,000 pounds or more. Carefully consider the weight of your equipment and decide where you want to mount it before choosing a cabinet or rack.

6. Rails
The vertical rails in cabinets and racks have holes for mounting equipment. Two post racks typically have threaded 12-24 or 10-32 tapped holes. 4-post racks and cabinets often have M6 square holes for mounting servers.

7. Moisture, dust, shock, vibration
When housing electronic components outside of a protected data center, look for a cabinet with a NEMA (National Manufacturers’ Association) rating. NEMA standards are designed for corrosion resistance, protection from rain, submersion, liquids, dust, falling objects, and other hazards. There are also NEBS-Telcordia standards for protection against seismic activity, shock, and vibration. Cabinets and racks can also be bolted to the floor for extra stability.

8. Power provisioning
There are multiple options for powering rackmounted equipment. Power strips mount can be mounted vertically or horizontally. Power Distribution Units (PDUs) and Power Managers have additional capabilities such as remote management and metering. Uninterruptible power supplies (UPSs) typically mount in the bottom of a cabinet or rack because of their weight.

9. Cable management
Most cabinets and racks have built-in cable management troughs and cable rings for routing cable. For more information on cable management, see 9 Ways to Improve Data Center Cable Management.

10. The extras
The type of shelving you choose depends on the equipment you plan to mount. There are multiple options: solid, vented, stationary, and pull-out shelves. And there are shelves built to hold specific pieces of equipment, such as servers or keyboards. Other extras include fans, waterfall brackets, and grounding bars.

Advertisements

Who needs remote power control? Everyone.

Simply put, remote power control is the ability to reset or reboot PC, LAN/WAN, telcom, and other computer equipment without being at the equipment’s location.
Horizontal Rackmount Remote Power Manager

Horizontal Rackmount Remote Power Manager (PS582A)

Who needs remote power control? Everyone, especially any organization with a network that reaches remote sites. This can include branch offices, unmanned information kiosks, alarm and control systems, and even HVAC systems for climate control. Other applications include unmanned remote monitoring stations, satellite control equipment at communication towers, cellular towers, and radio equipment.

For system administrators, the ability to perform power cycle or remote reboot is a way to avoid major communications problems. When equipment locks up and no longer responds to normal communications commands, it’s usually up to the system manager to reset or reboot it. After the power cycles on and off, normal communications resume. Often, there aren’t any technically trained personnel at the site who can perform maintenance and resets on equipment. Even if it is a manned station, there is a risk that the wrong equipment could be rebooted. To save traveling time and minimize downtime, remote power control enables the system manager to take care of things at the office without having to travel.

Continue reading

Storm season = surge protection

It was a dark and stormy night.

A line of storms blew through the Black Box campus in Lawrence, Pennsylvania yesterday. The power flickered, the UPSs beeped, and we were reminded again that it’s that time of year. It’s time for summer power problems.

Summer with its electrical storms, downed trees, and cranked-up AC, always seems to bring out the worst in our power grid. We tend to suffer from fading power—the lights dim and the background hum of civilization drops a notch, then recovers a few moments later when the power gets back up to speed.

UPS

APC Smart-UPS® 5000VA, 208V Rackmount/Tower for 5U: Rackmount or tower protection for your high-powered servers, telecom equipment, and business cricital systems.

Less often, we get a power surge like the big one we had at my home recently. The surge killed a couple of small appliances, but our nice new flat-screen TV was okay because a surge strip bravely gave up its life to save it. Part of the surge strip actually melted and the house smelled like ozone and burnt plastic for a couple of days afterwards. This is exactly what a good surge protector is supposed to do—sacrifice itself to preserve the expensive stuff when the big jolt comes through. Wish I’d thought to put a surge protector on the microwave.

Continue reading