Who needs remote power control? Everyone.

Simply put, remote power control is the ability to reset or reboot PC, LAN/WAN, telcom, and other computer equipment without being at the equipment’s location.
Horizontal Rackmount Remote Power Manager

Horizontal Rackmount Remote Power Manager (PS582A)

Who needs remote power control? Everyone, especially any organization with a network that reaches remote sites. This can include branch offices, unmanned information kiosks, alarm and control systems, and even HVAC systems for climate control. Other applications include unmanned remote monitoring stations, satellite control equipment at communication towers, cellular towers, and radio equipment.

For system administrators, the ability to perform power cycle or remote reboot is a way to avoid major communications problems. When equipment locks up and no longer responds to normal communications commands, it’s usually up to the system manager to reset or reboot it. After the power cycles on and off, normal communications resume. Often, there aren’t any technically trained personnel at the site who can perform maintenance and resets on equipment. Even if it is a manned station, there is a risk that the wrong equipment could be rebooted. To save traveling time and minimize downtime, remote power control enables the system manager to take care of things at the office without having to travel.

Even if you don’t have remote sites, remote power control is a must for your servers, switches, routers, and other network equipment plus the climate control equipment at your main data center. Even though you may be local, when problems occur in the middle of the night, headquarters can seem very far away.

Power can be controlled remotely via RS-232 commands over modems on existing or special phone lines, over the TCP/IP network, or locally with terminal software. The ideal system uses out-of-band management, an alternate path over an ordinary dialup line that doesn’t interfere with network equipment.

An effective remote power control system incorporates the following:

  • An existing phone line, such as a line being used for a fax, modem, or phone.
  • Transparent operation. The system shouldn’t interfere with or be affected by normal calls.
  • Security features. The system should prevent unauthorized access to network equipment.
  • Flexibility. System managers should be able to dial in from anywhere and control multiple devices with one call.
  • Have power control devices that meet UL and FCC requirements.

We can help you choose the remote power control equipment to best fit your needs:
Switched PDUS – Depending on the model, you can access power outlets across your network or the Internet, or across a phone line.
PDUs – Convenient vertical or horizontal rackmount power distribution units make power provisions your data center a snap.
Outlet-Managed PDUs – Monitor equipment power and automatically notify you of status changes via e-mail, text, SNMP, SYSLOG,  and audible alarms.

Call us at 877-877-2269 or chat with one of our Technical or Sales operators.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s